Hydraulic Filtration
Filter Elements
For filtration of hydraulic and lubricating oils - long-term protection for hydraulic systems.
The filter element is the central component of industrial filters. The actual filtration process takes part in the filter element. The main filter variables, such as retention capacity, dirt holding capacity and pressure loss are determined by the filter elements and the filter media used in them.
Product variants
Wire mesh filter elements
Nominal size
various sizes
Maximum operating pressure in bar
up to 330
Hengst filter elements
Nominal size
30
Maximum operating pressure in bar
up to 5
Data sheet Type 17., for the installation into Eaton filter housings RE 51465
Data sheet Type 1., 2. and 3. for the installation into old EPE filter housings RE 51507
Data sheet Type 1., according to DIN 24550 and Hengst standard RE 51515
Data sheet Type 2., according to DIN 24550 and Hengst standard RE 51517
Data sheet Type 4., according to Hengst standard RE 51519
Data sheet Type 6., according to Hengst standard RE 51521
Data sheet Type 7., according to Hengst standard RE 51523
Data sheet Type 20., according to Hengst standard RE 51525
Data sheet Type 2.Z, according to Hengst standard RE 51527
Data sheet Type 9., for the installation into Hydac filter housings RE 51529
Data sheet Type 10., for the installation into Hydac filter housings RE 51531
Data sheet Type 16., for the installation in Pall filter housings RE 51533
Data sheet Type 18., for installation in Filtration Group filter housing (previously Mahle Industriefiltration) RE 51535
Discs filter elements Celludisc
Nominal size
10
Maximum operating pressure in bar
up to 4
Screen basket filter elements
Nominal size
up to 2.500
Maximum operating pressure in bar
up to 4
TYP65. / Typ73.
Nominal size
1300 - 2600 / 0110 - 0270
Maximum operating pressure in bar
15 / 30
