Industrial air filtration products

Air intake filter systems

Air filtration for gas turbines, compressors and engines.

Gas turbines, compressors and engines require clean air in order to achieve maximum performance. Turbomachinery and engines are used successfully all over the world, even under the most difficult conditions. Sandstorms cause different problems than monsoon rains.

As an operator of compressors, turbines and motors, you therefore need filter systems that are individually adapted to the climatic conditions, dust concentrations and other local parameters. With the expert advice of our team and our wide range of individual solutions, we make it easier for you to select the right system for your application.

In order for your system to achieve maximum performance in the long term, the intake air must be optimally cleaned.

Product variants

Static filter system

Static filter system

In regions with relatively low dust concentrations, a static filter system is the most practical solution. A two-stage arrangement with pre-filter and fine filter is usually selected in order to achieve the required filter class and service life. Bag filters are usually used in the first stage and compact filter elements in the fine filter stage. For long periods of high humidity and mist, a droplet separator is also integrated. In zones with extremely high levels of open moisture, e.g. in coastal areas, an additional upstream coalescer filter system is recommended.

  • High filter efficiency

  • High dust holding capacity

  • Long maintenance intervals

Pulse filter system

Pulse filter system

Where there is a high concentration of dust, such as in desert areas and particularly polluted industrial regions, self-cleaning pulse filter systems are used. The dust particles are filtrated online on the surface of the Filter medium. The resulting dust cake is effectively removed by counter-flow pulse jet cleaning with compressed air. Depending on the local conditions, the pulse filter cartridges are arranged horizontally (cross flow system) or vertically (table filter system). Pulse filter systems are operated without an additional anti-icing system.

  • for high dust concentrations

  • Very dry climatic conditions

  • Heavy industry

Depth filter cartridge system

Depth filter cartridge system

A wide range of applications can be covered with depth filter cartridge systems. The pre-filter, designed as an economical, easy-to-change filter sock, is pulled directly over the depth filter cartridge. The compact design combines maximum filter performance with a long service life. Experience has shown that the anti-icing systems required for static systems can be dispensed with. Depth filter cartridges can also be used as a retrofit for existing pulse filter systems if the filter performance and service life of pulse filter cartridges is not sufficient due to low dust concentrations or high humidity levels.

  • Simple pre-filter hood change

  • Compact filters ensure high filter efficiency

  • Space-saving design for long maintenance intervals

  • No freeze protection necessary

MultiMaster-Vario air duct filter

MultiMaster-Vario air duct filter

The MultiMaster-Vario type universal air duct filter enables individual solutions for a wide range of applications. The system is equipped with static filters, such as Filter mats, Bag filters, Filter Elements and roll filters. Filter classes from G2 to H13 can be represented. Thanks to their innovative design, the housings are extremely stable and durable.

  • Wide range of applications

  • Ideal for the filtration of process air

  • Versatile filtration equipment

Pulse filter PowerTower

Pulse filter PowerTower

With the standard pulse filter system of the PowerTower type, the technical advantages of the pulse filter cartridges can also be realized cost-effectively for smaller air volumes. Accordingly, the PowerTower is used in particular for motors and smaller compressors. This development can be equipped with either horizontally or vertically suspended cartridges. While skirt plates ensure adequate coverage in the suspended cartridges, droplet separators are integrated into the intake opening as standard in the horizontal version.

  • Simple replacement of the pre-filter hood

  • Compact and space-saving design

  • Long service intervals

  • No frost protection required

Downloads

Further products

This might also interest you:
CPC flat cell filter
CPC flat cell filter
Air duct and safety filter
Air duct and safety filter
Welding fume filter
Welding fume filter

Please feel free to contact us:

Hengst SE
Nienkamp 55-85
48147 Münster
GERMANY
© 2024 Hengst SE

Please write to us:

If you have any questions or suggestions, you've come to the right place. Send us a message and we will reply as quickly as possible. To the contact form

purifying our planet

Our corporate vision
Sustainable

We make the planet cleaner with our products. We also make the journey there as clean as possible.

Innovative

We develop the filtration solutions of the future. For our customers and for society.

Efficient

Our focus is on energy efficiency. This helps the environment and saves costs.